欢迎光临 深圳市永佳润锡业有限公司 官方网站! 设为首页 | 加入收藏 | 繁体中文
深圳市永佳润锡业有限公司
现在是:
  • 260℃ High-temperature Solder wire260℃ High-temperature Solder wire
  • Welding Stainless steel Tin wireWelding Stainless steel Tin wire
  • Sn99.99% Tin ingotsSn99.99% Tin ingots
  • Sn99.90% Tin ingotsSn99.90% Tin ingots
  • Sn99.95% Tin ingotsSn99.95% Tin ingots
  • Sn99.95% Lead-free environmental protection anode barSn99.95% Lead-free environmental protection anode bar
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
News分类
Corporate NewsIndustry Trends
Contact
Shenzhen Yongjia Run Tin Co. , Ltd.
 
TEL:0755-27530602
FAX:0755-27530075 
Email:1350217623@qq.com 
Sales Hotline:15820477555 Xiaofeng Li
Corporate News www.sznantianxiye.com
无铅锡条产生锡渣的原因
发布日期:2020/7/22 11:38:50  已经浏览 318 次

无铅锡条造成锡渣的原因有下面几点:

1、锡渣产出率控制

1、无铅锡条焊料在焊接温度下不断氧化产生锡渣,使锡锅中焊料流动性变差,出现连焊

2、无铅锡条虚焊,焊点强度不够等质量问题。锡渣的产生有多方面的原因,基本可采用以下

那无铅锡条怎么避免锡渣过多呢,几个方面来解决这个问题。

1)无铅锡条波峰焊机参数调整,比如导流槽的高低,搅拌马达频率的大小都可能引起产渣的不同;

2)采用氮气保护让氮气把无铅锡条焊料与空气隔绝开来,避免了浮渣的产生:

3)使用无铅锡条焊锡抗氧化剂把焊料与空气隔绝开来,避免了浮渣的产生:

4)用抗氧化无铅锡条焊料;

5)除渣时使用还原剂,使渣锡分离,减少锡渣的产生。


版权所有 © 深圳市永佳润锡业有限公司 [www.sznantianxiye.com] 电话:400-0778-131  手机:15820477555  邮箱:228092037@qq.com